Showing 1–12 of 14 results

0.15x10mm Double Sided Adhesive Tape Super Strong

SKU : TDT50X10-T4
Click on the following link for product video demo presentation. Description: Double Sided Adhesive Tape Decoupage super Strong length 50m heat resistant, thickness 0.15mm , width 10mm. Color: milk Media: Non-woven cellulose Thickness: 0.15 mm Adhesive: acrylic (solvent ) Temperature resistance : from - 30 to 130 degrees

11mm transparent Hot Glue Stick Adhesive Rods Hot

Click on the following link for product video demo presentation. High viscosity white transparent Hot Glue Sticks Adhesive Rods Hot Melt Strips 11mmx270mm. Dimensions: 11mm*270mm. Material: EVA, Adhesive gum and Antioxidant. High Temperature and Strong Sticky. Sealed it and store in cool places. Environment friendly. Curing time: 10 to 15s Softening point: 80 degrees to 85 degrees The optimum temperature is between 140 degrees and 179 degrees Using range: ceramics, electronics, paper, toys, home, leather and footwear and so on The product need be used in conjunction with a glue gun Note: Children should use the product with the parents's supervision.

150mm Zip ties fastening tape cable wires fastener

Click on the following link for product video demo presentation. 3mm x150mm Nylon Cable Wire Zip Ties Width : 3 mm Length : 150 mm Packing list: 5 pieces zip ties

30W Mica heater soldering iron heating element

Click on the following link for product video demo presentation. 30W Mica heater element soldering iron element. Inter diameter: 4.2mm External diameter: 10mm Power: 30W Applicable voltage: 220AC  50Hz Features: Imported nickel-chromium wire, superior natural mica film, fast heating, long use time 2. Double ring design, can withstand high temperature for 500 hours the use of imported nickel wire and natural mica carefully developed, with fast, high temperature, long life, and other characteristics, long-term use of non-slip teeth.

50g solder paste wash-free welding flux hot gun heat gun paste YOUKILOON

50g solder paste wash-free welding flux hot gun heat gun paste Flux with stable performance, volatile small, long life cycle, the amount of provincial, non-toxic, odorless, safe and reliable, is to create high-quality electronic products ideal auxiliary products

Hot melting pistol glue gun 220AC 20W 7mm

Click on the following link for product video demo presentation. Handy and lightweight, comfortable to hold in hand. Heats quickly (2-3mins), no waste of time. Easy operation, 2 finger trigger, moves up and down in an arc. Wide application in handcraft and repair job. Note: 1. When the new glue gun is used for the first time, little smoke may appear, which is a normal phenomenon. After 30 minutes of use, the smoke will disappear automatically. 2. The glue gun shall not be raised and the nozzle shall not be upward during operation. If the glue gun is not applied for 15 minutes, please cut off the power supply to avoid damages caused by glue overflow. 3. In the process of use, do not take out the leftover glue stick. It can be used after next heating.
Material: Plastic, Aluminum Warm-up Time: 2-3 minutes Plug: EUR Standard Plug Working Power: 20W Voltage: 100-240 (V) Frequency : 50-60Hz Color: black, white, yellow, blue we will send you random color Glue rod diameter :7mm Features: - Great for home, office and school DIY crafts projects Super strong adhesive and easy to clean, suitable for metal, wood, glass, card, fabric, plastic, ceramics, etc. - Power switch with LED light mode Trigger propulsion device controls glue flow .Small Elm 20w Hot Melt Glue Gun 1. For hobby and craft. 2.output power: 20W, easy operationPacking list ELM 20W Glue gun (without glue stick)

NodeMcu ESP8266 V3 Lua CH340 WIFI Development board

For a demo video, click here: Description: Uses CH340G instead of CP2102. NodeMCU has a built-in USB-TTL serial with super-reliable industrial strength CH340G for superior stability on all supported platforms. Communication interface voltage: 3.3V. Antenna type: A Built-in PCB antenna is available. Wireless 802.11 b/g/n standard WiFi at 2.4GHz, support WPA / WPA2 security mode Support STA/AP/STA + AP three operating modes Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX) D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability of 15 mA AD0: 1 channel ADC Power input: 4.5V ~ 9V (10VMAX), USB-powered Current: continuous transmission: ˜70mA (200mA MAX), Standby: <200uA Transfer rate: 110-460800 bps Support UART / GPIO data communication interface Remote firmware upgrade (OTA) Support Smart Link Smart Networking Working temperature: -40? ~ + 125? Drive Type: Dual high-power H-bridge driver ESP8266 has an IO Pin You don't need to download resetting A great set of tools to develop ESP8266 Flash size: 4MByte

Pocket size DT-830D digital multimeter with buzzer LCD

Features of Digital Multimeter DT830D: Simple and easy, suitable for beginners With double fuse, safe and reliable 3 1/2 Digital LCD display, maximum display 1999. Diode and transistor testing, continuity and buzzer measurement. With test probe leads, a wide range of application. It is also a perfect tool for the laboratory, factory and home. With large LCD display, convenient to read data. Low battery indication, continuity buzzer and overload protection.

Raspberry Pi 4B 1.5GHz Quad-Core 4 GB RAM UK Official Element 14

The Raspberry Pi 4 Model B is the best performing single-board computer to date from the Raspberry Pi Foundation that has undergone a huge upgrade in comparison to all previous models. For the first time, the Pi 4 B is available in different memory versions up to 8GB with true Gigabit Ethernet, USB-C power, USB 3.0, dual 4k display output and a quad-core CPU to rival the performance of an entry-level desktop PC. It’s a truly powerful and capable computer in a small, affordable package.

Raspberry Pi3 Modle B+ 1.4GHz 64-bit quad-core pro

ASPBERRY PI 3 MODEL B+ 1.4GHz 64-bit quad-core processor, dual-band wireless LAN, Bluetooth 4.2/BLE, faster Ethernet The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range. Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz 1GB LPDDR2 SDRAM 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps) Extended 40-pin GPIO header Full-size HDMI 4 USB 2.0 ports CSI camera port for connecting a Raspberry Pi camera DSI display port for connecting a Raspberry Pi touchscreen display 4-pole stereo output and composite video port Micro SD port for loading your operating system and storing data 5V/2.5A DC power input Power-over-Ethernet (PoE) support (requires separate PoE HAT)

Rosin core lead solder wire 50g 0.6mm soldering wire

Click on the following link for product video demo presentation. Rosin core solder wire 50g 0.6mm soldering wire Good solderability, insulation resistance, No spattering and Non-corrosive. Widely used in electrical and electronics, solder parts like circuit board, electronics devices and others.

Solder Suction Tin Sucker Pump Aluminum body soldering wire removal Desoldering

Click on the following link for product video demo presentation. solder suction tin pump conventional aluminum repair Cleans off solder instantly. Replaceable tip.
Anti-static with replaceable nylon tip and durable aluminum housing.
Simple design allows easy one-handed use,lightweight and compact,suck the solder away easily.
Good little solder sucker,have a good bit of suction,you can just hang onto it and use your thumb to reset and suck.
Back pull pattern for the inner spring instantaneous suction is strong.
Ideal for use in labs, service shops, schools (STEM - steam), home and industry.
Specification: Material: Semi Aluminium