Showing 1–12 of 29 results

0.15x10mm Double Sided Adhesive Tape Super Strong

SKU : TDT50X10-T4
Click on the following link for product video demo presentation. Description: Double Sided Adhesive Tape Decoupage super Strong length 50m heat resistant, thickness 0.15mm , width 10mm. Color: milk Media: Non-woven cellulose Thickness: 0.15 mm Adhesive: acrylic (solvent ) Temperature resistance : from - 30 to 130 degrees

11mm transparent Hot Glue Stick Adhesive Rods Hot

Click on the following link for product video demo presentation. High viscosity white transparent Hot Glue Sticks Adhesive Rods Hot Melt Strips 11mmx270mm. Dimensions: 11mm*270mm. Material: EVA, Adhesive gum and Antioxidant. High Temperature and Strong Sticky. Sealed it and store in cool places. Environment friendly. Curing time: 10 to 15s Softening point: 80 degrees to 85 degrees The optimum temperature is between 140 degrees and 179 degrees Using range: ceramics, electronics, paper, toys, home, leather and footwear and so on The product need be used in conjunction with a glue gun Note: Children should use the product with the parents's supervision.

150mm Zip ties fastening tape cable wires fastener

Click on the following link for product video demo presentation. 3mm x150mm Nylon Cable Wire Zip Ties Width : 3 mm Length : 150 mm Packing list: 5 pieces zip ties

3.7V-4.2V 800mAh 18650 rechargeable battery cell

Features: Brand: 3.7V 18650 sizes Cylindrical Li-Ion Cell No memory effect and longer storage life than NiMH Batteries Lighter weight and higher energy density than any other rechargeable battery It is excellent to use as standard for text battery analyzer, used in DIY projects and power banks.

30W Mica heater soldering iron heating element

Click on the following link for product video demo presentation. 30W Mica heater element soldering iron element. Inter diameter: 4.2mm External diameter: 10mm Power: 30W Applicable voltage: 220AC  50Hz Features: Imported nickel-chromium wire, superior natural mica film, fast heating, long use time 2. Double ring design, can withstand high temperature for 500 hours the use of imported nickel wire and natural mica carefully developed, with fast, high temperature, long life, and other characteristics, long-term use of non-slip teeth.

3V 250mAh CR2032 Coin Cell Battery 20mm HUA DAO lithium 2032 cell

CR2032 Lithium metal 3V 250mAh button cell battery. Great for powering low power processors or blink an LED for weeks

50g solder paste wash-free welding flux hot gun heat gun paste YOUKILOON

50g solder paste wash-free welding flux hot gun heat gun paste Flux with stable performance, volatile small, long life cycle, the amount of provincial, non-toxic, odorless, safe and reliable, is to create high-quality electronic products ideal auxiliary products

Arduino Multi-functional Development Board kit

Description Arduino Multi-Function Shield ProtoShield For Arduino UNO LEONARDO MAGA2560 This module is an open source code base with the Simple i / o platform, and with the use of a similar java, C language development environment. So that you can quickly use the Arduino language and software such as Flash or Processing … to make interactive works. Arduino can be used to complete the development of electronic components such as Switch or Sensors or other controller, LED, stepper motor, or other output device. Arduino can also operate independently as a software platform that can communicate with, for example, said: flash processing Max / MSP VVVV or other interactive software …, Arduino development IDE interface is based on open source principles, allows you to download free of charge to develop more and order surprisingly interactive works. Features: This board can seamlessly connect with  UNO LEONARDO 2560 and other Mainstream Controller. 4 LED indicator, it can convenient for Debugging. DS18B20 temperature sensor interface LM35 temperature sensor interface 3296 precision adjustable potentiometer, with analog input port. Integrated infrared receiver Four digital LED Segment Displays (using 74HC595 driver provincial IO learning SPI). Three separate buttons (red color), a reset button, for experiments (HMI). With Buzzer Bluetooth, wireless interfaces, voice module, voice recognition module can be used for wireless communication experiment Servo interface, easy for drive servos. Infrared detection interface for easy docking and infrared, to achieve human traffic statistics. Package included: 1 x Multi-functional Expansion Development Board Base Learning Arduino

DC 9V 1A Power Supply Adapter

See this product in video click on the following link: Input: 100V - 240V AC, 50 - 60 Hz 0.5A Output: 9V DC 1000mA Weight: 121g

ESP32 WROOM-32D ESP32-DevKitC V4 wifi Bluetooth ESP32 Development Board Module

ESP32-WROOM-32D ESP32-DevKitC V4 wifi ESP32 Development Board Module If you are interested in connecting your project to the Web and being a part of the IOT (Internet of Things) project, this development board is for you! Like other microcontrollers and microprocessors, the ESP32 is built in power regulation circuits, on-board antennas, noise filters, and fits snugly on any breadboard for rapid prototyping. The ESP32 can interface with other MCUs as a master or slave, or operate completely independently via SPI / SDIO, I2C and UART. The microcontroller can also support multiple sensors with an SD card and 32 GPIO pins (all available for PWM). ESP32-WROOM-32D is a powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. Manufacturer: Espressif Protocol Supported: 802.11 b/g/n Frequency: 2.4 GHz to 2.5 GHz Protocol - WiFi - 802.11: WiFi Protocol - Bluetooth: Bluetooth v4.2 BR/EDR and BLE specification Series: ESP32 Module Interfaces: SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, IR, pulse counter, GPIO, capacitive touch sensor, ADC, DAC On-chip Sensor: Hall sensor Integrated Crystal: 40 MHz crystal Integrated SPI flash: 4MB Operating Voltage/Power Supply: 3V ~ 5V Operating Current Average: 80 mA Minimum Current Delivered by Power Supply: 500 mA Operating Temperature: –40 °C ~ +85 °C Moisture Sensitivity Level (MSL): Level 3 Dimensions: 54.4 x 27.9mm Weight: 10g

ESP32-CAM ESP32 WIFI+Bluetooth Camera OV2640 Module

See this product in video click on the following link: ESP32-CAM ESP32 WIFI+Bluetooth Development Board Module w/ OV2640 Camera Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module.Low-power dual-core 32-bit CPU for application processors. Main frequency up to 240MHz, computing power up to 600 DMIPS.Built-in 520 KB SRAM, external 4M PSRAM.Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC.Support OV2640 and OV7670 cameras, built-in flash. The ESP32-CAM is a small-sized camera module. The module can operate independently as a minimum system with a size of only 27*40.5*4.5mm and a deep sleep current of up to 6mA. It can be widely used in various IoT applications. It is an ideal solution for IoT applications. Features: Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module. Low-power dual-core 32-bit CPU for application processors. Main frequency up to 240MHz, computing power up to 600 DMIPS. Built-in 520 KB SRAM, external 4M PSRAM. Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC. Support OV2640 and OV7670 cameras, built-in flash. Support image WiFi upload, support TF card. Support multiple sleep modes, embedded Lwip and FreeRTOS. Support STA/AP/STA+AP working mode. Support Smart Config/AirKiss one-click distribution network, support secondary development. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other applications. Packaged in DIP and can be directly plugged into the backplane for quick production. Specifications: Material: Copper Module model: ESP32-CAM Package: DIP-16 Size: 27*40.5*4.5(±0.2)mm SPI Flash: 32Mbit by default RAM: Internal 520KB + external 4M PSRAM BT: BT 4.2BR/EDR and BLE standards WiFi: 802.11 b/g/n/e/i Support interface: UARI, SPI, I2C, PWM Support TF card: maximum support 4G IO port: 9 Serial port rate: default 115200bps Image output format: JPEG (only supported by OV2640), BMP, GRAYSCALE Spectrum range: 2412-2484MHz Antenna form: onboard antenna, gain 2dBi Security: WPA/WPA2/WPAS-Enterprise/WPS Power supply range: 5V Working temperature: -20 ° C -85 ° C Storage environment: -40°C-90°C, <90%RH Package size: 5*5*3cm/1.96*1.96*1.18in Package weight: 15g Transmit power: 802.11 b: 17±2dBm (@11Mbps) 802.11 g: 14±2dBm (@54Mbps) 802.11 n: 13±2dBm (@MCS7) Receive sensitivity: CCK, 1 Mbps: -90dBm CCK, 11 Mbps: -85dBm 6Mbps (1/2 BPSK): -88dBm 54Mbps (3/4 64-QAM): -70dBm MCS7 (65Mbps, 72.2Mbps): -67dBm Power consumption: Turn off the flash: 180mA@5V Turn on the flash and adjust the brightness to the maximum: 310Ma@5V Deep-sleep: The lowest power consumption can reach 6mA@5V Modern-sleep: up to 20mA@5V Light-sleep: up to 6.7mA@5V Packaged included: 1x ESP32-CAM WiFi Module with OV2640 Camera